Back-UPS CS - 350VA - 230V
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Provides management of the UPS via a USB port (not available on all models).
Provides management of the UPS via a serial port.
Data line surge protection
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides notification of changing utility power and UPS conditions.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery replacement without tools
Allows quick, easy battery replacement.
Provides temporary battery power when the utility power is out.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Resettable circuit breakers
Enables a quick recovery from overload events.
APC Back-UPS CS 350. Output power capacity: 350 VA, Output power: 210 W, Power supply input frequency: 50/60. Cable length: 1.83 m. Battery recharge time: 6 h, Typical backup time at half load: 23.4 min, Typical backup time at full load: 8.6 min. Colour of product: Beige. Quantity per pallet: 96 pc(s)