D-Link Adapter 1xWENet PCI 11 Mbit/s

  • Brand : D-Link
  • Product name : Adapter 1xWENet PCI
  • Product code : DWL-500
  • Category : Network Cards
  • Data-sheet quality : created/standardized by Icecat
  • Product views : 39364
  • Info modified on : 04 Apr 2019 03:56:25
  • Warranty: : Lifetime warranty
  • Long product name D-Link Adapter 1xWENet PCI 11 Mbit/s :

    D-Link DWL-500 Wireless LAN PCI Card 11Mbps

  • D-Link Adapter 1xWENet PCI 11 Mbit/s :

    The D-Link DWL-500 is a high-speed 11 Megabits per second (Mbps) Ethernet wireless network adapter that plugs into your PC’s PCI bus slot. Once connected with other networked PC’s, it allows you to share hard disk drives, DVD drives, CD drives, Iomega Zip drives, printers and provides shared access to a modem for Internet access.

    It strictly adheres to the most advanced IEEE networking Standard for wireless connections, so the D-Link DWL-500 is very compatible with multi-vendor environments that also meet the standard compliance for the IEEE 802.11b. The DWL-500 bandwidth data transmission rate can be set manually at 11Mbps, 5.5Mbps, 2Mbps, 1Mbps or it can be set on dynamic auto-sensing configuration.

    The D-Link DWL-500 will connect point to point (Ad Hoc) or it can use an access point (Infrastructure Mode) to extend the reach of its communications capability. It has full mobility and seamless roaming from cell to cell as well as across access points. The range of coverage per cell for indoor use is up to 100 meters and up to 300 meter per cell for outdoor use.

    The D-Link DWL-500 is an IEEE 802.11b compliant 11Mbps wireless LAN PCI adapter. The DWL-500 will operate in 2.4 GHz Direct Sequence Spread Spectrum (DSSS) for wireless networks in the home or office environment. It is PCI Local Bus 2.2 compliant. In addition, the DWL-500 supports WEP (Wired Equivalent Privacy) Encryption for network security..

    The D-Link DWL-500 can operate in either Ad-Hoc mode (Peer-to-Peer networking without access point) or Infrastructure mode (Peer-to-Peer networking using an access point). In Infrastructure mode, the DWL-500 can be connected to a broadband residential gateway or a xDSL/Cable modem for high-speed wireless Internet access on the existing network.

    The DWL-500 can transmit data at 11, 5.5, 2 or 1 Mbps per channel. The DWL-500 transmit rate values can be manually selected for Auto Select 1 or 2 Mbps, Fixed 1 Mbps, Fixed 11 Mbps, Fixed 2 Mbps, Fixed 5.5 Mbps and Fully Auto. The DWL-500 has full mobility and seamless roaming from cell to cell as well as across access points. The range of coverage per cell for indoor use is up to 100 meters and up to 300 meters per cell for outdoor use.

    The DWL-500 comes with an internal non-detachable diversity patch antenna and one built-in green LED indicator for power, network link and activity. The DWL-500 is compatible with Windows 98, ME, 2000, NT 4.0 and other popular operating systems.

  • Short summary description D-Link Adapter 1xWENet PCI 11 Mbit/s :

    D-Link Adapter 1xWENet PCI, PCI, 11 Mbit/s

  • Long summary description D-Link Adapter 1xWENet PCI 11 Mbit/s :

    D-Link Adapter 1xWENet PCI. Host interface: PCI. Maximum data transfer rate: 11 Mbit/s

Specs
Ports & interfaces
Host interface PCI
Network
Maximum data transfer rate 11 Mbit/s
Bandwidth 2.4 GHz
Design
LED indicators Power

Operational conditions
Operating temperature (T-T) -10 - 50 °C
Operating relative humidity (H-H) 0 - 95%
Other features
Dimensions (WxDxH) 18 x 166 x 120 mm
Distributors
Country Distributor
1 distributor(s)