HP Stitch S300 64-in Printer pencetak format besar Pemejalwapan celup Warna 1200 x 1200 DPI 1625 x 1220 mm Ethernet LAN
Stitch S300 64-in Printer
Gain peace of mind with a complete—printer, ink, media, and software—solution designed to work together perfectly. Navigation is intuitive, and the in-the-box RIP makes color management easy with this versatile, safe investment.
Product disclaimer
This printer is intended to work only with cartridges that have a new or reused HP chip, and it uses dynamic security measures to block cartridges using a non-HP chip. Periodic firmware updates will maintain the effectiveness of these measures and block cartridges that previously worked. A reused HP chip enables the use of reused, remanufactured, and refilled cartridges. More at: More at http://www.hp.com/learn/ds
HP Stitch S300 64-in Printer, Pemejalwapan celup, 1200 x 1200 DPI, Hitam, Sian, Merah tua, Kuning, 1625 x 1220 mm, 0.5 mm, Ethernet gigabit
HP Stitch S300 64-in Printer. Teknologi cetak: Pemejalwapan celup, Resolusi maksimum: 1200 x 1200 DPI, Warna cetakan: Hitam, Sian, Merah tua, Kuning. Saiz cetakan maksimum: 1625 x 1220 mm, Ketebalan media: 0.5 mm. Jenis antara muka ethernet: Ethernet gigabit, Kadar data LAN ethernet: 10,100,1000 Mbit/s. Tahap tekanan bunyi (cetakan): 71 dB, Pensijilan: WEEE; EU RoHS; RoHS Ukraine; RoHS Turkey; REACH; EPEAT Bronze; OSHA; CE, Segmen HP: Rumah. Penggunaan kuasa (siap siaga): 80 W, Penggunaan kuasa (biasa): 1000 W
[2] Printing on porous media—direct-to-fabric—is intended for short runs only.
[3] End-to-end service experience managed by HP. Individual services may be provided by HP or an HP-authorized partner. Some services depend on printer, service contract, and region availability.
Technical specification disclaimers
The color variation inside a printed job has been measured at 6-pass mode on transfer media and also in direct-to-fabric situations within this limit: maximum color difference (95% of colors) ≤ 1.5 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 1.5 dE2000. Backlit substrates measured in transmission mode may yield different results. Results are dependent on sublimation process variability.
Papers are hygroscopic materials. They can absorb or lose moisture depending on external humidity conditions. A low level of substrate’s moisture and external relative humidity is always recommended when printing on paper based materials. Recommended external relative humidity is between 25% to 50%.